DIY: Photo Coasters

So my best friend is moving into an apartment with her boyfriend and I wanted to give her a personalized gift. Something that they both can enjoy and that is useful. Being that Pinterest is an obsession of mine, I came across a DIY photo coaster project. This is definitely a weekend project, as you need time for everything to dry.

Here is what you’ll need:

  • Plain ceramic tiles (Home Depot .13¢)
  • Felt (Michael’s)
  • Mod Podge (Michael’s)
  • Sponge applicator (Michael’s)
  • Hot glue gun
  • Photos printed from a local drugstore kiosk.
  • Clear acrylic gloss coating spray

Let’s get started!

Measured and cut the felt into squares.

Apply the felt with a hot glue gun to the bottom of the tile, and allow to dry. I found that applying the hot glue onto the felt then pressing onto the coaster worked best.

Once I cut my selected photos down to fit the size of the tile, I applied a layer of Mod Podge to the back and positioned the photo on the tile. This is the part where you walk away. Watch a show, eat dinner, go shopping, basically do something that will keep you occupied for a couple of hours.

Apply a layer of Mod Podge onto the photo. Allow to dry for some hours. Apply another coat, and allow to dry. And one last coat. That’s three coats all together. Photo should be nice and sealed onto the tile once completed.

I waited a couple days before going crazy with the acrylic spray. I placed the tiles on a trash bag and went to coating them. I sprayed about 5 layers waiting 20 mins in between each layer.

Once completely dry, I made sure photos were secure and that the felt was completely attached before gifting to my friend and her boyfriend as a house warming gift. As you can see the acrylic spray gives the tiles a great glossy finish. I’m curious to see how long the finish lasts.

Advertisements

DIY: Dip Dye

Yesterday, I decided to do a little dip dye to some white shirts. I stumbled upon the tutorial on Free People’s blog. It’s quick, easy and doesn’t even in a huge mess.

I used Rit Dye instead of the Dylon as suggested and a bucket instead of a glass pan (worked exactly the same).

Once you have all of your supplies…

Mix a quarter of the dying powder into the tray or bucket with 4 cups of warm water and 4 tablespoons of salt. Once the powder has dissolved, fill the tray or bucket up with water to make a very dilute color. Soak the bottom of the tee so the color will trail up it nicely.

I just want to dye everything now!!